LV-WT180

180 kg lyftvinsch 400V. Lyfter 100m. Perfekt till höga konstruktioner.

Pris med moms:
37.580,00 kr
Pris utan moms:
30.064,00 kr

I lager

Beskrivning

Lyftvinsch 180 kg 400V 100m
En nyhet, som tillmötesgår behovet av ett snabbt lyft. LV-WT180 är liten men snabb effektivt och snabb lyftvinsch producerad hos ComeUp:
Lyfter 180 kg 100m
Hastighet 17-23m/min.
Elektromagnetisk broms.

Leveranstid normalt 6-8  arbetsdagar. 

Beskrivning av LV-WT180, lyftvinsch 180 kg 400V 100m
Lightweight and compact design for wind energy turbines for efficient and economical operation at great heights.

The standard lifting height of up to 100 meters and high lifting speed are perfect guarantees for efficient operation.

Extreme high duty cycle 40%ED, 2m FEM classification, 240 times of start per hour.

Electromagnetic spring-applied failsafe brake integrated into the motor.
Planetary gears for maximum mechanical efficiency.
Emergency stop and up and down limits functions come as standard.
24 VDC control for safe operation.
Positive opening safety up and down limit switches meet CE requirement
All electric components, up and down limits protection, and brake are compliant to CE and VED requirements.

Se våra övriga produkter i denna kategori

Teknisk info

ComeUP AC winch

FEM Classification: 2m, 240 times starts/per hour, 40% duty cycle
Lifting Capacity: 180 kg at wire rope top layer
Power Source : 50Hz, 3 phase, 380/400/415/440V
Speed : 17 – 23 m/min
Motor : 1.0 hp x 4 P induction brake motor at IP 55 and F class ratings
Gear Train: 2 stages planetary gears
Brake (Integrated in motor): 230V DC electromagnetic failsafe brake
Drum size: 120 x 200 x 185 mm
Control: 24 VDC low voltage control
Remote Control : An emergency stop switch and 3 meter cord
Limits Protection : Up and Down limits protection
Wire Rope : 5 mm X 100 m untwisted w/weight hook
Weight hook w/safety latch
Suspension plate
Switch cord 1.25 mm2 x 3C x 3 m
Low voltage control LV-320
Pendant switch PB-306 w/an emergency stop
Mounting bolts pattern: 350 mm x 220 mm
Compliant with EN 14492-1 requirements for hoisting application:
The working coefficient for the first rope layer on the drum shall be at least 5.
The D/d ratio to the center of the rope shall be at least 15 for the drum.

Ved at bruge hjemmesiden accepterer du brugen af cookies mere information

Cookie indstillingerne på denne hjemmeside er aktiveret for at give dig den bedste oplevelse. Hvis du fortsætter med at bruge hjemmesiden uden at ændre dine cookie indstillinger eller du klikker Accepter herunder, betragtes dette som din accept

Luk